Multiplex PROFI TX 9 User Manual

Model templates
Page 80
PROFI TX
4.3.2 SHIP / BOAT model template
This model template is suitable for all types of water-based models.
The control functions Spoiler, Flap, Light, and Aux-1 to Aux-3 provide the
Slow function. This allows operating support legs and ramp at a realistically slow
speed. Smooth transition for Light is also possible.
Flight phase switching originates from model flying, as the names suggests. We left
this function activated for boat / ship models. Inventive modellers will have good
ideas for practical application.
Control function assignments and names can be changed as required.
This template does not contain pre-defined mixers. To personalise control, 4 mixers on
the control side and 7 mixers on the servo side are provided, each with eight outputs.
Controls assignment, control function, and settings
Control
function
Control
Setting
Parameter
Gimbal h
Horizontal stick
axis. Assignment
by means of
controls mode.
Trim
FP4
Step size
Expo
FP4
D/R
Travel
FP4
0%
1.5%
0%
100%
100%
Gimbal v
Vertical stick axis.
Assignment by
means of controls
mode.
Trim
FP4
Step size
Expo
FP4
D/R
Travel
FP4
0%
1.5%
0%
100%
100%
Rudder
Horizontal stick
axis. Assignment
by means of
controls mode.
Trim
FP4
Step size
Expo
FP4
D/R
Travel
FP4
0%
1.5%
0%
100%
100%
Throttle
¢
Trim
FP4
Step size
0%
1.5%

Multiplex PROFI TX 9 Specifications

General

Brand	Multiplex
Model	PROFI TX 9
Category	Remote Control
Language	English