2.6 Warranty
Our products are covered by the currently valid statutory warranty regulations. If you
wish to make a claim under warranty, please contact the model shop where you
purchased the product.
The warranty does not cover malfunctions caused by the following:
improper operation, wrong connections, terminal reversal
use of third-party components not authorised by us
modifications / repairs that were not authorised or carried out by an
authorised MULTIPLEX Service Centre
accidental or deliberate damage
defects due to improper use and / or normal wear and tear
operation of the equipment outside the technical specifications
Observe also the advice included in the relevant transmitter documentation!
2.7 EC declaration of conformity
The PROFI TX devices were assessed in accordance with the relevant harmonised
European directives.
You are therefore the owner of a product whose design fulfils the protective aims of
the European Community relating to the safe operation of equipment.
The detailed declaration of conformity can be downloaded from our website:
www.multiplex-rc.de
under
DOWNLOADS / Product Information
If required, you may also request us for the declaration of conformity:
MULTIPLEX Modellsport GmbH & Co.KG
Customer Service
Westliche Gewerbestraße 1
D-75015 Bretten-Gölshausen
Germany
To Next Page
Loading...
Need help?
General
