5.7.7 Date & Time
The PROFI TX features a clock with calendar that continues to run when the
device is switched off. The clock (RTC) is used for the alarm clock function and for
the file system on the SD card.
In line 1, the date and time are displayed on the right.
Move the input cursor in turn to the menu items "Year", "Month", "Day",
"Weekday", "Hour", and "Minute".
Open the input field next to the menu item by pressing the wheel or the ENTER
button.
Set the date or time using the wheel or the + / - buttons.
Finish entering by pressing the wheel or the ENTER button.
Year
Set the current year.
Month
Set the current month.
Weekday
Set the current weekday.
Hour
Set the hour of the current time in 24-hour format.
Minute:
Set the minute of the current time.
The seconds display remains zero with the Minute input field open, i.e. the clock is
stopped while the input field is open.
For an accurate time setting, set the next minute and close the input field when the
clock strikes the full minute.
To Next Page
Loading...
Need help?
General
