5 Menus
The PROFI TX software is divided into status displays and menus that are
structured in several levels.
5.1 Status displays
Eight status displays provide information about transmitter, model and sensors.
The status display is shown after transmitter start-up or when exiting the main
menus.
Press the + or – buttons or use the central wheel to toggle between screens. Every
clockwise increment on the central wheel cycles to the next status display (see also
chapter 6 "Operating the transmitter" on page 160).
5.1.1 Status display #1
Status display #1 provides an overview of the current battery and device status:
The device name is shown in the first line. You can overwrite this name with
customised text (menu: Setup > Transmitter > User data > Name
parameter, see section 5.3.8 "Transmitter" on page 109).
The left side of the table provides information about the battery, e.g. battery
voltage, remaining operating time (time to empty), etc.
The right side of the table provides information about the device, e.g. serial
number, uptime count, etc.
To Next Page
Loading...
Need help?
General
