Binding
ï‚· Activates the binding procedure and displays the current binding status (see
section "Binding" on page 48).
The binding procedure is completed. If the receiver has an
ID, this ID number is displayed.
The device is locating the receiver, the binding procedure is
in progress.
5.3.2 Flight phases
It is useful to have different settings and trims for specific flight phases when flying
models. The flight phases technology in the PROFI TX provides an easy and
convenient way to realize this. You can copy settings for one flight phase to another,
lock flight phases if they are not needed, assign switches to flight phases, etc.
Refer to section 8.2.10 "Working with flight phases" on page 207 for information on
how to work with flight phases, assign switches to flight phases, lock / unlock flight
phases, etc.
Flight phase number (1, 2, 3, or 4)
Identifies the flight phase in other menus. In the control function menus,
all settings that can differ between flight phases are accompanied by the
respective identifying number 1 to 4 for the flight phase.
To Next Page
Loading...
Need help?
General
