Pre-flight checks
Charge the transmitter, receiver and flight batteries carefully, and verify their
state of charge at regular intervals.
Ensure that the correct model memory is active.
Carry out a range check (see section 3.6 "Range check" on page 47).
Check the function and effect of all primary and secondary control systems.
If you discover any irregularities, do not fly. Locate the problem, eliminate it, and
then check again.
When operating the model:
If you have never flown a radio-controlled model before, it is highly
recommended you consult an experienced model pilot when getting started.
A trainer (buddy-box) system is ideal for taking the first steps in learning to fly.
Models should only be operated at suitable sites.
Never fly or drive over or towards spectators.
Do not carry out any high-risk flying or driving manoeuvres.
Know your limits: do not over-estimate your abilities and skills.
If you detect any sign of a problem or interference, land or cease operations
immediately.
To Next Page
Loading...
Need help?
General
