Multiplex PROFI TX 9 User Manual

Transmitter
Page 24
PROFI TX
3
Warning lights for sensors used on the model. The warning lights indicate
whether the alarm values for certain sensor groups have been exceeded (see
section "Warning lights" on page 25).
4
Two extremely low-friction, ball-raced stick units for controlling the four
primary axes.
 The stick ratchet for throttle / spoiler can be activated to the right or left
(see section 3.3.2 "Adjusting stick units" on page 33).
 Both stick units can be swivelled to suit the pilot’s ergonomic preferences
(see section 3.3.2.1 "Swivelling stick units" on page 33).
The stick tops can be rotated and freely adjusted in length, and are available
in different variants.
5
Two slide potentiometers with position markers for freely assignable channel
and / or switched functions.
6
Buttons for digital trim of the four stick units (see section 3.8 "Digital trim" on
page 51).
7
Central wheel for navigating through the menus and editing set values.
The wheel can be turned in increments to the left or right and can be pressed
(see section 6.2 "Operation using the wheel" on page 163).
8
Keypad, consisting of eleven buttons in two rows
 The six buttons in the upper row are used for quick and direct access to the
six main menus (see section 6.1.1 "Direct access buttons" on page 160).
 The five buttons in the second row are used for programming the
transmitter (see section 6.1.2 "Buttons for special functions" on page 161).
 With the exception of the ENTER button, all the buttons have a dual
function for text input. Text is entered in a similar way to mobile phones
(see section 6.1.3 "Text input" on page 162).
9
Installation slots for additional controls and digi-adjusters (see section 3.3.4
"Installing additional controls" on page 3.3.4).
10
Lug for attaching a support strap (# 8 5161 or # 8 5646).

Multiplex PROFI TX 9 Specifications

General

Brand	Multiplex
Model	PROFI TX 9
Category	Remote Control
Language	English