Murr Elektronik CUBE20S PROFINET IO User Manual

PROFINET IO
User manual 57106_hdb_en_13 82 / 94
ChannelErrorTypes
Tab. 11-6: ChannelErrorTypes
Code Description
0x0001 Short circuit
0x0002 Undervoltage (supply voltage)
0x0003 Overvoltage (supply voltage)
0x0004 Output module is overloaded
0x0005 Overtemperature output module
0x0006 Cable break of the sensor or actuator
0x0007 Upper limit value exceeded
0x0008 Lower limit value exceeded
0x0009 Error (on-load voltage at output, sensor supply, hardware error)
0x000A Simulation active
0x0010 Parameterization error
0x0011 Sensor or on-load voltage missing
0x0012 Fuse defective
0x0013 Communication error
0x0014 Grounding error
0x0015 Reference channel error
0x0016 Process interrupt lost
0x0017 Threshold interrupt
0x0018 Outputs are disabled
0x0019 Safety-related disconnection
0x001A External error
0x001B Unspecified error
0x001C Cube20S: error on Cube20S bus
0x001D Cube20S: failed to write parameter
0x001E Cube20S: version error
0x0101 IO device: unexpected restart
0x0108 Shared Device error - This hardware revision state does not support Shared
Device.
0x0109 FMM configuration has been changed - manual restart required.

Murr Elektronik CUBE20S PROFINET IO Specifications

General

Brand	Murr Elektronik
Model	CUBE20S PROFINET IO
Category	Control Unit
Language	English