MANUAL
Mico Pro®
5 / 92
4.1.3.4 Output protections with signal connector 29
4.1.4 Isolation voltages 29
4.1.4.1 Type testing 29
4.1.4.2 Routine testing 29
4.1.4.3 Field testing 29
4.1.4.4 Isolation resistance 30
4.1.4.5 PE resistance 30
4.1.5 Mechanical data 30
4.1.5.1 Materials 30
4.1.5.2 Mounting data 30
4.1.6 Product reliability 31
4.1.7 Conformity, Approvals 31
4.2 Mico Pro PM (power module) 32
4.2.1 Electrical data 32
4.2.1.1 Input 32
4.2.1.2 Control input 32
4.2.1.3 Output 32
4.2.1.4 Control output 33
4.2.2 Environmental characteristics 33
4.2.2.1 Climatic 33
4.2.2.2 Mechanical 33
4.2.2.3 Electrical safety 34
4.2.2.4 EMC-interference 34
4.2.2.5 EMC-immunity 34
4.2.3 Protection 34
4.2.3.1 Device protection 34
4.2.4 Mechanical data 34
4.2.4.1 Materials 34
4.2.4.2 Mounting data 35
4.2.5 Product reliability 35
4.2.6 Conformity, Approvals 35
4.3 Mico Pro PD (power distribution) 36
4.3.1 Electrical data 36
4.3.1.1 Input 36
4.3.1.2 Output 36
4.3.2 Environmental characteristics 36
4.3.2.1 Climatic 36
4.3.2.2 Mechanical 37
4.3.2.3 Electrical safety 37
4.3.2.4 EMC-interference 37
4.3.2.5 EMC-immunity 37
4.3.3 Protection 38
4.3.3.1 Device protection 38
4.3.4 Mechanical data 38
4.3.4.1 Materials 38
4.3.4.2 Mounting data 38
4.3.5 Conformity, Approvals 39
To Next Page
Loading...