71
HIGHEST CAB TO PROGRAM CONSISTS
You can set the highest cab number to set up, kill, or modify consists. A value of 0
allows all cabs access.
CLEAR ALL ADVANCED CONSISTS
This will kill ALL advanced consists contained in the system. It will clear lead, rear and
mid consist locomotive addresses. A broadcast command is sent to ALL locomotives on
the track to set CV 19 to 0
The cab will still show CON: until a new locomotive is selected.
. Press 1 to clear the consists.
CLEAR ALL CAB MEMORY
This will clear memory in a system. It will clear out all currently selected locomotives, all
recalls, function status, speed and direction information for every cab. Cab address 2 will
have locomotive 3 selected automatically, all other cabs will have short address 0
selected. Consists, Macros and Computer cab information will be preserved.
To Next Page
Loading...
