73
ASSIGNING BELL TO FUNCTION
Enter the function number that should be activated when the Bell key is pressed. We
recommend using 1, however any function number may be used.
ASSIGN 02:00PMASSIGN 02:00PM
ASSIGN 02:00PMASSIGN 02:00PM
ASSIGN 02:00PM
BELL TO FUNC: 1BELL TO FUNC: 1
BELL TO FUNC: 1BELL TO FUNC: 1
BELL TO FUNC: 1
Older Soundtraxx Steam decoders use Function #3 for the Bell. The steam decoders
can have the bell “re-mapped” to Function #1 (Diesel decoders can not re-map the bell
to Function #3). Press ENTER to skip setting this parameter.
To Next Page
Loading...
