9-24
7. Align the board with the grooves of the guide rail, and insert the board slowly and gently.
8. Carefully push the board until it engages and
IMPORTANT: If the board cannot be install it.
fully seats in the slot connector.
installed easily, remove the board once and then re
Excess force added to the board may cause the board to be broken.
NOTES:
After installed the long board, secure it with the lock on the upper part of the guide rail.
the PCI board slots. They are for protecting the PCI board
re not to remove or damage the insulator when installing or
is taken off, reinstall the insulator in place.
Insulators are installed between
already been installed. Take ca
removing the PCI board. If the insulator
9. Slowly close the tab to secure the PCI boa
NOTE: Make sure that the tab is firm or I/O
rd.
ly locked. If the tab is unlocked, the PCI board and/
board may be damaged due to unstable PCI board.
To Next Page
Loading...
