NEC MH240 - INTRODUCTION; WHAT IS MH240?

15
• SETUP CHECK POINT
You should confirm your system about following items and setup the item(s) if required.
1. VM Number (See “Set the VM Number”)
You should set VM Number to appropriate number (it is depending on your system setting)
when you want to use VM feature.
2. I-SIP Port (See “Set the I-SIP Port”)
You should set I-SIP Port to appropriate value (it is depending on your system setting) when
you want to use I-SIP feature.
You should set I-SIP Port to blank when you want to use MH240 as Standard SIP phone.