76
• AP Scan Mode
The following shows how to place the MH240 in AP scan mode and explanation of each item.
STEP1: Press to enter AP Scan Mode.
STEP2: Press key to select the scan channel and then press “search” soft key.
STEP3: Scanning will start.
STEP4: When scan is completed, the result will be displayed on an AP basis.
STEP5: Press key to select an AP and then press “Detail” soft key to show for more detail.
● ESSID
● BSSID
● Channel
● RSSI
● Security
Site Survey
Search Detail Back
NEC-setup 1 -36
default 1 -73
WL001 1 -60
private320 1 -55
Received Signal Strength Indicator (RSSI)
Extended Service Set Identifier
(ESSID)
Site Survey
Search Back
Please set
the scan channel.
1
Site Survey
AP Scanning
Channel
Site Survey
Back
1.ESSID
NEC-setup
2.BSSID
00:11:22:99:88:77
To Next Page
Loading...
