NEC MH240 - TO DISPLAY IP ADDRESS

64
Set the WLC Address:
Factory Default: 172.16.254.10 (1.NEC-SETUP)
You can set the WLC Address. If you want to use CAC feature, this setting is required.
STEP1: On the Advanced menu, press key to select “12.WLC Address” and then press
“OK” soft key.
STEP2: Edit WLC Address and then press “OK” soft key.
STEP3: Press to save.
Advanced
12.WLC Address
08.Packet Los Count
09.Active Time
10.Home Time
11.CAC Mode
172 . 16 . 254 . 10
WLC Address
12 OK Clear