NEC MH240 - Set the DHCP (IP); Set the IP Address

34
Set the DHCP (IP):
Factory Default: DHCP
STEP1: Go to “Config” menu. (See “PLACE THE PHONE IN CONFIG MODE”)
STEP2: Press to view Profile Select menu.
STEP3: Press key to select a profile you want to edit and then press “OK” soft key.
STEP4: Press to enable DHCP.
STEP5: Press to save.
STEP6: Press to return to Standby mode.
Set the IP Address:
Factory Default: 172.16.1.240 (1.NEC-SETUP)
STEP1: Go to “Config” menu. (See “PLACE THE PHONE IN CONFIG MODE”)
STEP2: Press to view Profile Select menu.
STEP3: Press key to select a profile you want to edit and then press “OK” soft key.
STEP4: Press to go to IP Address edit screen.
STEP5: Edit IP Address you want and then press “OK” soft key.
STEP6: Press to save.
Prof. Select
Delete OK Back
1.NEC-SETUP
2.<Profile2>
3.<Profile3>
4.<Profile4>
Prof. Select
Delete OK Back
1.NEC-SETUP
2.<Profile2>
3.<Profile3>
4.<Profile4>
IP Address
172 . 16 . 1 . 200
12 OK Clear