53
Set the Channel:
Factory Default: Channel 1 to 11 are ON
You can specify channel to use for the phone. Available channels are Channel 1 to 11. Multiple
selections are also available. In default, all channels will be used.
STEP1: On the Advanced menu, press key to select “01.Channel” and then press “OK”
soft key.
STEP2: Press key to select a channel you want to switch ON/OFF.
STEP3: Press “Check” soft key to switch ON/OFF the channel.
STEP4: Press “OK” soft key after setting is completed.
STEP5: Press to save.
NOTE: Channel that is set to ON will be indicated by a icon on the left of the channel.
Advanced
05.H.O. Delta
01.Channel
02.Data Rate
03.TX Power
04.H.O. Start
Channel
Check OK Back
1
2
3
4
To Next Page
Loading...
