NEC MH240 - Set the Security (WPA: TLS)

28
Set the Security (WPA: TLS):
Factory Default: WPA2-PSK (1.NEC-SETUP), OPEN (2 to 9)
STEP1: Go to “Config” menu. (See “PLACE THE PHONE IN CONFIG MODE”)
STEP2: Press to view Profile Select menu.
STEP3: Press key to select a profile you want to set security and then press “OK” soft key.
STEP4: Press to go to Security setting screen.
STEP5: Press key to select “WPA” and then press key.
STEP6: Press key to select an encryption “1.TKIP” or “2.AES” and then press key.
STEP7: Press to set EAP type to TLS.
Prof. Select
Delete OK Back
1.NEC-SETUP
2.<Profile2>
3.<Profile3>
4.<Profile4>
Security
WPA
OPEN
WEP
WPA-PSK
WPA2-PSK
WPA
1.TKIP
2.AES
AES
5.CA Cert.
1.EAP
2.Identity
3.User Name
4.Password