NEC MH240 - Place the Phone in Config Mode

18
• PLACE THE PHONE IN CONFIG MODE
To set administrator-related data such as Network, WLAN and SIP data, place the phone in Config
mode. Config Password entry is required to do this.
STEP1: Press key in Standby mode to display the main menu.
STEP2: Press to go to “1.Config” menu.
STEP3: Enter Config Password (4 digits) to view “1.Config” menu.
Note: When the phone has been initialized, please enter new Config Password.
1/ 1 Tue 12:00AM
MH240
Password
12 OK Clear
Password:
****
Config
1.Wireless
2.SIP Setteings
3.Config Password