42
• SIP SETTINGS
This section explains the SIP data for the phone. The following items are covered here.
• Set the Profile Name
• Set the SIP Proxy
• Set the SIP Port
• Set the Registrar
• Set the Registrar Port
• Set the User ID
• Set the User Password
• Set the Phone No.
• Set the I-SIP Port
Set the Profile Name:
Factory Default: 1.NEC-SETUP (2 to 9 are blank)
STEP1: Go to “Config” menu. (See “PLACE THE PHONE IN CONFIG MODE”)
STEP2: Press to view Profile Select menu.
STEP3: Press key to select a profile you want to edit and then press “OK” soft key.
STEP4: Press to go to Profile Name edit screen.
STEP5: Edit Profile Name you want and then press “OK” soft key.
STEP6: Press to save.
Prof. Select
Delete OK Back
1.NEC-SETUP
2.<SIP Prof2>
3.<SIP Prof3>
4.<SIP Prof4>
Profile Name
Office1
12 OK Clear
To Next Page
Loading...
