NEC MH240 - Set the Nprobes

58
Set the Nprobes:
Factory Default: 3 times
You can set the times of sending probe request to search APs as required.
STEP1: On the Advanced menu, press key to select “06.Nprobes” and then press “OK”
soft key.
STEP2: Edit Nprobes value and then press “OK” soft key.
STEP3: Press to save.
3
Nprobes
12 OK Clear
Advanced
10.Home Time
06.Nprobes
07.Scan Start
08.Packet Los Count
09.Active Time