NEC MH240 - Set the TX Power (Transmission Power)

55
Set the TX Power (Transmission Power):
Factory Default: 2.Middle
You can set the transmission power for the phone. Available power is High, Middle or Low.
STEP1: On the Advanced menu, press key to select “03.TX Power” and then press “OK”
soft key.
STEP2: Press key to select an appropriate power and then press “OK” soft key.
STEP3: Press to save.
Advanced
05.H.O. Delta
01.Channel
02.Data Rate
03.TX Power
04.H.O. Start
TX Power
OK Back
1.High
2.Middle
3.Low