NEC MH240 - Set the Registrar Port

46
Set the Registrar Port:
Factory Default: 5070
STEP1: Go to “Config” menu. (See “PLACE THE PHONE IN CONFIG MODE”)
STEP2: Press to view Profile Select menu.
STEP3: Press key to select a profile you want to edit and then press “OK” soft key.
STEP4: Press to go to Registrar Port edit screen.
STEP5: Edit Registrar Port and then press “OK” soft key.
STEP6: Press to save.
Prof. Select
Delete OK Back
1.NEC-SETUP
2.<Profile2>
3.<Profile3>
4.<Profile4>
Reg. Port
12 OK Clear
5070