NEC MH240 - PASSWORD LOCK; TO USE MANUAL LOCK; TO UNLOCK YOUR PHONE

65
• SIP ADVANCED SETTINGS
This section explains the SIP advanced data settings for the phone. The following items are covered
here.
• Set the Register Timer
• Set the Codec
• Set the Payload Size
• Set the DTMF Mode
• Set the Jitter Buffer
• Set the VM Number
To set SIP Advanced Data, open advanced settings as follows.
STEP1: Go to “Config” menu. (See “PLACE THE PHONE IN CONFIG MODE”)
STEP2: Press to view Profile Select menu.
STEP3: Press key to select a profile you want to edit and then press “OK” soft key.
STEP4: Press to go to Advanced menu.
Prof. Select
Delete OK Back
1.NEC-SETUP
2.<SIP Prof2>
3.<SIP Prof3>
4.<SIP Prof4>
Advanced
5.Jitter Buffer
1.Register Timer
2.Codec
3.Payload Size
4.DTMF Mode