NEC MH240 - Set the Packet Los Count

60
Set the Packet Los Count:
Factory Default: 10 times
You can set the packet los count as required. If the phone detects exceeding the packet los count,
searching APs starts.
STEP1: On the Advanced menu, press key to select “08.Packet Los Count” and then press
“OK” soft key.
STEP2: Edit Packet Los Count value and then press “OK” soft key.
STEP3: Press to save.
Advanced
10.Home Time
06.Nprobes
07.Scan Start
08.Packet Los Count
09.Active Time
10
Packet Los
12 OK Clear