NEC MH240 - Set the Gateway

36
Set the Gateway:
Factory Default: -
STEP1: Go to “Config” menu. (See “PLACE THE PHONE IN CONFIG MODE”)
STEP2: Press to view Profile Select menu.
STEP3: Press key to select a profile you want to edit and then press “OK” soft key.
STEP4: Press to go to Gateway edit screen.
STEP5: Edit Gateway you want and then press “OK” soft key.
STEP6: Press to save.
Prof. Select
Delete OK Back
1.NEC-SETUP
2.<Profile2>
3.<Profile3>
4.<Profile4>
172 . 16 . 0 . 1
Gateway
12 OK Clear