NEC MH240 - Set the Hand-Off List

40
Set the Hand-off List:
Factory Default: NEC-SETUP
STEP1: Go to “Config” menu. (See “PLACE THE PHONE IN CONFIG MODE”)
STEP2: Press to view Hand-off List.
STEP3: Press key to select a profile area you want and then press “OK” soft key.
STEP4: Press key to select a profile you want to add and then press “Save” soft key.
STEP5: Press to save.
Prof. Select
Save Back
Office1
Office2
Office3
Office4
Hand-offLst
OK Back
1.NEC-SETUP
2.<Profile2>
3.<Profile3>
4.<Profile4>