NEC MH240 - TO ADD A NEW ENTRY

39
Set the SIP Profile:
Factory Default: NEC-SETUP (1.NEC-SETUP)
STEP1: Go to “Config” menu. (See “PLACE THE PHONE IN CONFIG MODE”)
STEP2: Press to view Profile Select menu.
STEP3: Press key to select a profile you want to edit and then press “OK” soft key.
STEP4: Press to view SIP Profile list.
STEP5: Press key to select a profile area you want and then press “OK” soft key.
STEP6: Press key to select a profile you want to add and then press “Save” soft key.
STEP7: Press to save.
Prof. Select
Delete OK Back
1.NEC-SETUP
2.<Profile2>
3.<Profile3>
4.<Profile4>
Set SIPProf.
Delete OK Back
1.NEC-SETUP
2.<Profile2>
3.<Profile3>
4.<Profile4>
Prof. Select
Save Back
Office1
Office2
Office3
Office4