NEC MH240 - Set the Active Time

61
Set the Active Time:
Factory Default: 20 msec
You can modify the active time as required. After the phone sends probe request, the phone waits
probe response from AP until this timer expires.
STEP1: On the Advanced menu, press key to select “09.Active Time” and then press
“OK” soft key.
STEP2: Edit Active Time value and then press “OK” soft key.
STEP3: Press to save.
Advanced
10.Home Time
06.Nprobes
07.Scan Start
08.Packet Los Count
09.Active Time
20
Active Time
12 OK Clear