EasyManua.ls Logo

NEC NP-PH3501QL - Page 109

NEC NP-PH3501QL
162 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
83
4. Projector Adjustment and Connecting
HDMI cable (not supplied)
• UseacertiedHighSpeedHDMI
®
Cable or High Speed HDMI
®
Cable with Ethernet.
• WhenconnectingtheHDMI1INorHDMI2INconnectoroftheprojectortotheBlu-rayplayer,theprojector'svideo
level can be made settings in accordance with the Blu-ray player's video level. In the menu select [ADJUST]
[VIDEO][VIDEOLEVEL]andmakenecessarysettings.
DisplayPort cable (not supplied)
• UseacertiedDisplayPortcable.
BNC cable (not supplied)
• Usecablesthatare5C-FBorhigher(5C-FB,7C-FB,etc.)orBelden1694Aorhigher.Inaddition,usecableswith
a cable length 100m or less.
• Thelengthofcablesthatcanbeusedmaydiffer,dependingonthesignal.
LAN cable (not supplied)
• Pleaseuseashieldedtwistedpair(STP)cableofCategory5eorhigherfortheLANcable(soldcommercially).
• TheHDBaseTportoftheprojectorsupportsHDMIsignals(HDCP)fromtransmissiondevices,controlsignalsfrom
external devices (serial, LAN) and remote control signals (IR commands).
• ThemaximumtransmissiondistanceovertheLANcableis100m.(themaximumdistanceis70mfora4Ksignal)
• Pleasedonotuseothertransmissionequipmentbetweentheprojectorandtransmissionequipment.Thepicture
quality may be degraded as a result.
• ThisprojectorisnotguaranteedtoworkwithallHDBaseTtransmissiondevicessoldcommercially.
After turning on the power of the unit, select the input according to the connection terminal.
Input connector Button on the projector
cabinet
Button on the remote
control
Note
HDMI1/2 IN HDMI HDMI Switches between HDMI1 and HDMI2 each time
it is pressed.
DisplayPort 1/2 IN DisplayPort DisplayPort
• SwitchesbetweenDisplayPort1andDisplay-
Port2 each time it is pressed.
• SelectDisplayPort1forduallink.
SDI 1/2/3/4 IN 3G/HD/SD-SDI AUX • SwitchesbetweenSDI1,SDI2,SDI3andSDI4
each time it is pressed.
• SelectSDI1forquadlinkorduallink.
HDBaseT HDBaseT NETWORK

Table of Contents

Other manuals for NEC NP-PH3501QL

Related product manuals