NEC NP-PH3501QL - Installing Using Eye Bolts

114
7. Appendix
7-7-2 Installing using eye bolts
Eye bolts can be used to lift and move the projector or to install it permanently suspended from the ceiling.
Mount the eye bolts to the bottom or side surface of the blocks shown in the diagram below.
Max M10x20
Max M10x20
Max M10x20
Max M10x20
NOTE:
• Cautionswhenusingeyebolts
 Whenmountingeyeboltsonthesidesurfaceandsuspendingtheprojectorfromtheside,besuretouseswiveleyebolts.
 Also,useacushioningmaterialoverthewireinpartswhereitcomesincontactwiththeprojectortoprotecttheprojectorfrom
scratches.