NEC NP-PH3501QL - Switching the Operating Mode

122
7. Appendix
7-8-2. Switching the operating mode
There are two menu modes available. The menu items that can be used differ depending on the mode.
When you click “Change mode ” on the menu bar, you can switch the mode. Dedicated passcodes need to be entered
in order to switch to Service mode.
Mode Description
User mode Menu for installation. (initial setting)
Service mode Menu for the service personnel.
1.
Click the “Change mode ” button on the menu bar.
The “Control Mode” screen appears.
2. Click the button of the mode to change.
3. Input the passcode and click “OK” button.
 WhenchangingtotheUsermode,youdonotneedtoinputthepasscodeisnotneeded.
NOTE:
• Whenyouenterthepassword,payenoughattentiontopeoplearoundforthepasswordabuseprevention.
 Ifyouhaveanxietythepasswordischeated,changethepasswordimmediately.
 Beforeenteringthepassword,inspectthepasswordentrydevice(PC)foranyevidenceofphysicaltampering.Intheeventthat
anysuspiciousmarkingsarepresent,“DONOT”enterthepasswordandconsultwiththedistributor.
 Alwaysstorethepasswordandprojectorinasafeplaceandneverdivulgethepasswordtounauthorizedentities.