NEC NP-PH3501QL - Attaching the Controls;Indicator Panel Display Label

61
2. Configuring the projector’s initial settings
2-4. Attaching the controls/indicator panel display label
Attach the supplied controls/indicator panel display label to the projector’s control panel.
(1) Peel off the default attached label.
(2) Peel the label off the backing paper and attach it to the projector’s control panel.
•Lineupthecornersofthelabelwiththefourprotrusions.
•Install carefully, making sure the label does not touch the buttons.
Protrusion
Protrusion
Protrusion
Controls/indicator panel display label
This completes mounting of the controls/indicator panel display label.
Mount the side panel. (→ page 17)