119
7. Appendix
Menu bar
The following menu buttons are displayed by default.
Select
Projector
Change
mode
RefreshLog Viewer *Create
log
* The function of Log Viewer is available on Service Mode only.
You can add menu buttons to the menu bar by dragging the menu buttons from the tree menu found on the left.
To remove menu buttons that you have added, right-click on the menu button you want to remove, then click “Delete”
menu.
“Shield” button
The DCC controls can be disabled by this button to prevent inadvertent operation (The “Shield” button is displayed
in orange).
Press the “Shield” button again to return to the original state.
To Next Page
Loading...
