NEC NP-PH3501QL - 4 Projector Adjustment and Connecting; Flow of Adjustment and Connecting

69
4. Projector Adjustment and Connecting
4-1. Flow of Adjustment and Connecting
Perform the adjustment and connection of the projector according to the the following procedure
Step 1
• TurningontheProjector(→ page 70)
Step 2
• Selectingtheprojectororientation(→ page 74)
Step 3
• AdjustingthePictureSizeandPosition(→ page 75)
 Displaythetestpatterntoadjustthescreensize,screenratioandfocus.
Step 4
• ConnectingtoOtherEquipments(→ page 82)
Step 5
• Turning off the projector (→ page 85)
This chapter explains the adjustment and connection of the projector with Steps from 1 to 5.
The adjustment and connection of the projector is completed by performing all steps in order