NEC NP-PH3501QL - Lens Shifting Range

10
1. Before Setting Up Your Projector
Lens shifting range
This projector is equipped with a lens shift function for adjusting the position of the projected image by using the LENS
SHIFT buttons (→ page 77). The lens can be shifted within the range shown below.
NOTE:
• Pleasedonotusethelensshiftfunctionwhenprojectingportraitimages.Pleaseuseitwiththelensinthecenter.
Legend: V “Vertical” refers to the screen height and H “Horizontal” refers to the screen width. The lens shift range is
expressed as a ratio of height and width, respectively.
100%V
③
④
100%H
①②
Height of projected image
Width of projected image
* The lens shift range is the same for ceiling installation.
4096 × 2160 (Aspect ratio: 17:9)
Lens unit Drawing number
①② ③④
L2K-10F1 8%H 27%V
L4K-11ZM 17%H 50%V
L4K-15ZM 17%H 50%V
L4K-20ZM 17%H 50%V
L2K-30ZM 8%H 27%V
L2K-43ZM1 8%H 27%V
L2K-55ZM1 10%H 31%V
(Examplecalculation)Ifprojectingona300inchscreenusinganL4K-15ZMlensunit
According to the “Table of screen sizes and dimensions” (→ page 9),H=265.4"/674.0cm,V=139.9"/355.4cm.
Adjustmentrangeintheverticaldirection:theprojectedimagecanbemovedupwards0.5 × 139.9"/355.4 cm ≈
70"/178 cm, downwards approximately 70"/178 cm (when the lens is at the center position). Adjustment range in the
horizontal direction: the projected image can be moved to the left 0.17 × 265.4"/674.0 cm ≈ 45"/115 cm, to the right
approximately 45"/115 cm.
* Figures differ by several % because the calculation is approximate.