NEC NP-PH3501QL - Page 86

60
2. Configuring the projector’s initial settings
(2) Remove blocking panel B.
NOTE:
• AfterremovingblockingpanelsAandB,besuretostoretheminasafe
place.
3. Mount the LV unit onto the projector.
(1) Insert the LV unit by following the guide on either side of the slot.
guide (left/right)
(2) Tighten the screws (4) on the front of the LV unit to fasten.
NOTE:
• SettheLVunit’sdisplaysintheproperdirection,accordingtotheprojec-
tor.InsertingtheLVunitupsidedowncanresultindamage
• Tightenthescrewssecurely.
This completes installing of the LV unit.
Next, attach the controls/indicator panel display label.