96
6. Maintenance
(2) Lift the upper air filter in the direction of the arrow and
remove it.
NOTE
•
Donotapplyahighdegreeofforceorattempttopryitopen.
Thiscoulddeformtheangemakingitimpossibletoreattach
theltercover.
5. Clean all the dust from the filters using a vacuum cleaner.
(1) Carefully remove the dust from the filter covers as well as from both sides of all the filters.
(2) Remove the dust from the grates on the outside of the
projector as well.
Be sure to also remove any dust stuck to the louver
(blind with angled horizontal slats) with a vacuum
cleaner.
NOTE
•
Wheneveryouvacuumthelter,usethesoftbrushattachment
tovacuum.Thisistoavoiddamagetothelter.
• Donotwashthelterwithwater.Doingsocanresultindam-
agetotheltermembraneandalsocauseclogging.
6. Put the various parts of the filter together and fit them inside the filter cover.
Fine grade lter Filter coverCoarse grade lter