NEC NP-PH3501QL - Page 127

101
7. Appendix
LIGHT Indicator
Indicator display Projector status Procedure
Off The light module is turned
off.
–
Lit Green Light module lit –
TEMP. Indicator
Indicator display Projector status Procedure
Off No problem
Flashing Red Temperature problem Ambient temperature is out of the operation temperature.
Check if any obstruction stays near the exhaust vent.
Lit Red High surrounding tem-
perature
The surrounding temperature is high. Lower the room
temperature.
SHUTTER Indicator
Indicator display Projector status
Off Shutter is open.
Flashing Green Performing the lens calibration.
Orange Lens calibration implement request.
Lit Green Shutter is closed.
Orange
Onscreenmuting
KEY LOCK Indicator
Indicator display Projector status
Off
[CONTROLPANELLOCK][OFF]
Lit Orange [CONTROLPANELLOCK][ON]
REAR LED
When[REARLED]under[NOTIFICATIONSETTINGS]issetto[ON],theoperationisasshownbelow.Whensetto
[OFF],therearLEDisalwaysoff.
Light status indicator
Off:Thelightmoduleisturnedoff
On(white):Lightmodulelit
System status indicator
OperatesinthesamewayastheSTATUS
indicator.