NEC NP-PH3501QL - Page 155

129
7. Appendix
INFORMATION Screen (Log)
Clickthe“Log”buttononthetreemenutodisplaytheINFORMATION-Logscreen.
You can check the various logs saved in the projector main unit from this screen.
“Error Log” button Displays the System Error Log screen.
“Usage Reset Log” button Displays the User Reset Log screen.
This displays various information about when the light source, fans, air lter, phos-
phor, and diffuser usage times were reset.
“Temperature Log” button Displays the Temperature Log screen.
This displays a record of the temperature from when the projector was turned on
until it was turned off (peak hold).
[Pressure Log] button Displays the Pressure Log screen.
This displays a record of the atmospheric pressure from when the projector was
turned on until it was turned off (peak hold).
“FAN Speed log” button Displays the FAN Speed Log screen.
This displays a record of the fan speed (minimum value) from when the power was
turned on until it was turned off (peak hold).
“OperationLog”button DisplaystheOperationLogscreen.
This displays a record of the operation of the projector.