NEC NP-PH3501QL - Page 97

71
4. Projector Adjustment and Connecting
3. Turn on the light power switch ([1]) then the projector power switch ([2]) on the side of the projector.
The POWER indicator lights up orange.
• Thebuzzersoundisreleasedwhen[NOTIFICATIONSETTING]for[BUZZER]isON.
ON
ON
OFF
OFF
Projector power switch
Light power switch
WARNING
The projector produces a strong light. When turning on the power, make sure no one within projection range is
looking at the lens.
4. Press the (POWER) button on the projector cabinet
or the POWER ON button on the remote control.
The POWER indicator goes from a steady orange light to
asteadygreenlight,andthepictureisprojectedonthe
screen.
• Ifusingtheremotecontrol,pressthePOWERONbut-
ton.
• Whenthere is no signal the unit will project a blue
screen (factory default menu settings).
• Ifthepictureisblurry,adjustthescreenfocus.(→ page
79)
• Whenitisdarkpressthe (lights) button. The indicator
panel backlight and the LED lamp on the right side of
the projector will turn on.
TIP:
• Thelensshutterremainsclosedevenwhenthepoweristurned
onwiththePowerOnShutterfunction.
• PressingthebuttonwillnotactivatetheunitwhentheKEYLOCK
indicatorisashingorange.
• Whenthemessage“PROJECTORISLOCKED!ENTERYOUR
PASSWORD.” is displayed, it means that the [SECURITY]
featureisturnedon.
 Afteryoupoweronyourprojector,ensurethatthecom-
puter or video source is turned on.
NOTE:Thebluescreen([BLUE]background)isdisplayedwhenno
signalisbeinginput(byfactorydefaultmenusettings).
Standby Blinking Power On
Steady orange
light
Blinking green
light
Steady green
light