NEC Univerge SV8100 - Page 1010

Issue 1.0 UNIVERGE SV8100
2 - 986 Station Message Detail Recording
35-02-01 SMDR Output Options – Toll
Restricted Call
SMDR can include or exclude calls
blocked by Toll Restriction.
0 = Not Displayed
1 = Displayed
(default = 1)
3
35-02-02 SMDR Output Options – PBX Calls When the system is behind a PBX,
SMDR can include all calls or just
calls dialed using the PBX trunk
access code.
0 = Not Displayed
1 = Displayed
(default = 1)
3
35-02-03 SMDR Output Options – Trunk
Number or Name
Select whether the system should
display the trunk name (0) or the
number (1) on SMDR reports.
 If this option is set to 0,
Program 35-02-14 must be set
to 0.
0 = Name
1 = Number
(default = 1)
3
35-02-04 SMDR Output Options – Summary
(Daily)
Set this option to (1) to have the
SMDR report provide a daily
summary (at midnight every night).
0 = Not Displayed
1 = Displayed
(default = 1)
3
35-02-05 SMDR Output Options – Summary
(Weekly)
Set this option to (1) to have the
SMDR report provide a weekly
summary (every Saturday at
midnight).
0 = Not Displayed
1 = Displayed
(default = 1)
3
35-02-06 SMDR Output Options – Summary
(Monthly)
Set this option to (1) to have the
SMDR report provide a monthly
summary (at midnight on the last
day of the month).
0 = Not Displayed
1 = Displayed
(default = 1)
3
35-02-07 SMDR Output Options – Toll
Charge Cost
Set this option to (1) have the
SMDR report include toll charges.
0 = Not Displayed
1 = Displayed
(default = 1)
3
35-02-08 SMDR Output Options – Incoming
Call
Enable this option (1) to have the
SMDR report include incoming calls.
If you disable this option (0),
incoming calls do not print.
0 = Not Displayed
1 = Displayed
(default = 1)
3
35-02-09 SMDR Output Options – Extension
Number or Name
Set this option (1) to have the
SMDR report include extension
numbers. Set this option (0) to have
the SMDR report include extension
names.
0 = Name
1 = Number
(default = 1)
3
35-02-10 SMDR Output Options – All Lines
Busy (ALB) Output
Determine if the All Lines Busy
(ALB) indication should be
displayed.
0 = Not Displayed
1 = Displayed
(default = 0)
3
35-02-12 SMDR Output Options – DID Table
Name Output
Determine if the DID table name
should be displayed for incoming
DID calls.
0 = Not Displayed
1 = Displayed
(default = 0)
3
35-02-13 SMDR Output Options – CLI
Output When DID to Trunk
Determine if the Caller ID should be
displayed when the incoming DID
number is transferred to an outgoing
trunk.
0 = Not Displayed
1 = Displayed
(default = 0)
3
35-02-14 SMDR Output Options – Date Determine whether the date should
be displayed on SMDR reports.
 This option must be set to 0 if
the trunk name is set to be
displayed in Program
35-02-03.
0 = Not Displayed
1 = Displayed
(default = 0)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3