NEC Univerge SV8100 - Page 1029

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 1005
35-01-01 SMDR Options – Output Port
Type
This option specifies the type of
connection used for SMDR. The
baud rate for the COM port should
be set in Program 15-02-19.
0 = None
3 = LAN
4 = CTA/CTU
(default = 0)
3
35-01-02 SMDR Options – Output
Destination Number
This option specified the SMDR
printer output extension (CTA
extension number).
Up to eight digits
(default not assigned)
3
35-01-03 SMDR Options – Header
Language
Specify the language in which the
SMDR header should be printed.
0 = English
1 = German
2 = French
3 = Italian
4 = Spanish
(default = 0)
3
35-01-04 SMDR Options – Omit Digits The number of digits entered for
this option do not print on the
SMDR Report (0~24). For
example, if the entry is 10, the first
10 digits a user dials do not appear
on the SMDR report.
0~24
(0 = Not applied)
(default = 0)
3
35-01-05 SMDR Options – Minimum Digits Outgoing calls must have at least
this number of digits for inclusion in
the SMDR report (0~24).
0~24
(0 = Not applied)
(default = 0)
3
35-01-06 SMDR Options – Minimum Call
Duration
A call must last at least this time to
be included in the SMDR report.
0~65535 (seconds)
(0 = All)
(default = 0)
3
35-01-07 SMDR Options – Minimum Ring
Time (For Incoming Calls)
A call must ring for at least this
time to be included in the SMDR
report.
0~65535 (seconds)
(0 = All)
(default = 0)
3
35-01-08 SMDR Options – Format
Selection
Use to set the SMDR (Station
Message Detail Recording) format
for each of the eight SMDR ports.
0 = NA Type (North
America)
1 = G/J Type
(Overseas/ Japan)
(default = 0)
3
35-02-01 SMDR Output Options – Toll
Restricted Call
SMDR can include or exclude calls
blocked by Toll Restriction.
0 = Not Displayed
1 = Displayed
(default = 1)
3
35-02-02 SMDR Output Options – PBX
Calls
When the system is behind a PBX,
SMDR can include all calls or just
calls dialed using the PBX trunk
access code.
0 = Not Displayed
1 = Displayed
(default = 1)
3
35-02-03 SMDR Output Options – Trunk
Number or Name
Select whether the system should
display the trunk name (0) or the
number (1) on SMDR reports.
 If this option is set to 0,
Program 35-02-14 must be
set to 0.
0 = Name
1 = Number
(default = 1)
3
35-02-04 SMDR Output Options –
Summary (Daily)
Set this option to (1) to have the
SMDR report provide a daily
summary (at midnight every night).
0 = Not Displayed
1 = Displayed
(default = 1)
3
35-02-05 SMDR Output Options –
Summary (Weekly)
Set this option to (1) to have the
SMDR report provide a weekly
summary (every Saturday at
midnight).
0 = Not Displayed
1 = Displayed
(default = 1)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3