NEC Univerge SV8100 - Page 1042

Issue 1.0 UNIVERGE SV8100
2 - 1018 SV8100 Desktop Applications
In addition to the above programming, define the programming options as required for the system
features. Refer to the UNIVERGE SV8100 Programming Manual for programming details. Callback,
Callback Request, and Auto Redial are not supported.
Operation
Refer to the UNIVERGE SV8100 Desktop Applications Manual for detailed feature information.
84-20-02 SIP Extension Basic Information
Setup – Session Timer Value
Use this program to define the
periodic refresh time that allows
both user agents and proxies to
determine if the SIP session is still
active.
0~65535
(default = 180)
3
84-20-03 SIP Extension Basic Information
Setup – Minimum Session Timer
Value
Use this program to define to
convey the minimum allowed value
for the SIP session timer.
0~65535
(default = 180)
3
84-22-01 DT700 Series Multiline Logon
Information Setup – User ID
Input the User ID for each Personal
ID Index (1-512) when using auto
or manual registration in 10-46-01.
Up to 32 characters
(default not assigned)
3
84-22-02 DT700 Series Multiline Logon
Information Setup – Password
Input the Password for each
Personal ID Index (1-512) when
using auto or manual registration in
10-46-01.
Up to 16 characters
(default not assigned)
3
84-26-01 IPL Basic Setup – IP Address Assign the IP address for each
DSP on the IPLA.
xxx.xxx.xxx.xxx
Defaults:
Slot 1 = 172.16.0.20
:
Slot 4 = 172.16.0.44
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3