Issue 1.0 UNIVERGE SV8100
2 - 1040 SV8100 PoE Gigabit Switch
Traffic on a port can be mirrored to another port for analysis with a network analyzer.
Firmware Upgrade.
Built in Web UI for easy browser-based configuration (HTTP).
Rate Limiting.
Ingress Policer.
Egress rate control.
Conditions
When Auto Negotiation is denied and port speed is set to 100Mbps, the yellow LED (located
on the RJ45 connector) is ON. When port speed is set to 10Mbps, this LED is OFF.
The number of supported CD-ETIA blades are to be determined by the power consumption
chart. Reference Hardware manual for more details.
When linking multiple CD-ETIA cards each card will have to be statically assigned IP
address and each blade will be linked.
Default Setting
None
System Availability
Terminals
None
Required Components:
CD-ETIA
Related Features
None
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
To Next Page
Loading...
