NEC Univerge SV8100 - Page 1065

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 1041
 Level 1 – these are the most commonly assigned programs for this feature.
 Level 2 – these are the next most commonly assigned programs for this feature.
 Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
10-55-01 Package Network Setup – IP
Address
Use to define the IP Address for the
CD-ETIA.
 When the blade is deleted from
the system using Program 90-
05, the programming for the
slot in 10-55 is set back to
default.
0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.255255.254
192.0.0.1 ~
223.255.255.254
(default =
172.16.1.100)
3
10-55-03 Package Network Setup – Main/
Add-on
The Main setting is to be utilized to
distribute an IP Address to the
blade.
0 = Main
1 = Add-on
(default = 1)
3
10-55-04 Package Network Setup – Sub
Net Mask
Define the subnet mask for the
CD-ETIA.
128.0.0.0
192.0.0.0
224.0.0.0
240.0.0.0
248.0.0.0
252.0.0.0
254.0.0.0
255.0.0.0
255.128.0.0
255.192.0.0
255.224.0.0
255.240.0.0
255.248.0.0
255.252.0.0
255.254.0.0
255.255.0.0
255.255.128.0
255.255.192.0
255.255.224.0
255.255.240.0
255.255.248.0
255.255.252.0
255.255.254.0
255.255.255.0
255.255.255.128
255.255.255.192
255.255.255.224
255.255.255.240
255.255.255.248
255.255.255.252
255.255.255.254
255.255.255.255
(default = 255.255.0.0)
3
10-55-05 Package Network Setup – Default
Gateway
Define the default gateway for the
CD-ETIA.
0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.255255.254
192.0.0.1 ~
223.255.255.254
(default = 0.0.0.0)
3