NEC Univerge SV8100 - Page 1125

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 1101
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
 Level 1 – these are the most commonly assigned programs for this feature.
 Level 2 – these are the next most commonly assigned programs for this feature.
 Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
10-12-01 CD-CP00-AU Network Setup – IP
Address
Assign the IP Address. 0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.254.255.254
192.0.0.1 ~
223.255.255.254
(default = 192.168.0.10)
3
10-12-02 CD-CP00-AU Network Setup –
Subnet Mask
The setting of Subnet Mask is
invalid when all Host Addresses
are 0.
If the network section is:
0,
127,
128.0,
191.255,
192.0.0,
223.255.255
The setting of Subnet Mask is
invalid
.
128.0.0.0 240.0.0.0
254.0.0.0
255.192.0.0
255.252.0.0
255.255.128.0
255.255.248.0
255.255.255.0
255.255.255.224
255.255.255.252
192.0.0.0 248.0.0.0
255.0.0.0
255.224.0.0
255.254.0.0
255.255.192.0
255.255.252.0
255.255.255.128
255.255.255.240
255.255.255.254
224.0.0.0 252.0.0.0
255.128.0.0
255.248.0.0
255.255.0.0 (Default)
255.255.224.0
255.255.254.0
255.255.255.192
255.255.255.248
255.255.255.255
(default = 255.255.0.0)
3