NEC Univerge SV8100 - Page 113

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 89
80-04-02 Call Progress Tone Detector
Setup – Min. Detection Level
Use this option to set the minimum
detection level.
0~15
detect level 0:
-15dBm(0) to
-30dBm(15)
detect level 1:
-30dBm(0) to
-45dBm(15)
detect level 2:
-40dBm(0) to
-55dBm(15)
default:
Type 1 (DT) – 15
(-25dBm)
Type 2 (BT) – 15
(-25dBm)
Type 3 (RBT) – 15
(-25dBm)
Type 4, Type 5 – 0
3
80-04-03 Call Progress Tone Detector
Setup – S/N Ratio
Use this option to set the Signal to
Noise ratio.
0~4 (0dB ~ -20dB)
Default:
Type 1 (DT) = 4
(-20dB)
Type 2 (BT) = 4
(-20dB)
Type 3 (RBT) = 4
(-20dB)
Type 4 = 0
Type 5 = 0
3
80-04-04 Call Progress Tone Detector
Setup – No Tone Time
Use this option to set No Tone
Time.
0~255 (30+30-7680 ms)
default: 13 (420 ms)
Type 1 (DT) – 132
(3990 ms)
Type 2 (BT) – 132
(3990 ms)
Type 3 (RBT) – 132
(3990 ms)
Type 4, Type 5 – 0
3
80-04-05 Call Progress Tone Detector
Setup – Pulse Count
Use this option to set the Pulse
Count.
1~255
default: 2
Type 1 (DT) – 1
Type 2 (BT) – 1
Type 3 (RBT) – 1
Type 4, Type 5 – 0
3
80-04-06 Call Progress Tone Detector
Setup – ON Minimum Time
Use this option to set the minimum
On time.
1~255 (30+30-7680 ms)
default: 10 (330 ms)
Type 1 (DT) – 9 (300 ms)
Type 2 (BT) – 9 (300 ms)
Type 3 (RBT) – 25
(780ms)
Type 4, Type 5 – 0
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3