NEC Univerge SV8100 - Page 1134

Issue 1.0 UNIVERGE SV8100
2 - 1110 Traffic Reports
Operation
None
90-20-08 Traffic Report Data Setup – ACD
Operator All Busy Output
Use to define the ACD operator al
busy output details of the traffic
report.
0 = Not Detected
1~256
(Report when the data
reaches the defined
value)
(default = 0)
3
90-20-09 Traffic Report Data Setup –
Attendant Channel All Busy
Output
Use to define the attendant channel
all busy output details of the traffic
report.
0 = Not Detected
1~256
(Report when the data
reaches the defined
value)
(default = 0)
3
90-20-10 Traffic Report Data Setup – Base
Station All Busy Output
Use to define the base station all
busy output details of the traffic
report.
0 = Not Detected
1~256
(Report when the data
reaches the defined
value)
(default = 0)
3
90-21-01 Traffic Report Output – Output
Port Type
Define the output port to be used
for the traffic reports. The reports
print hourly when connected to the
output device.
3 = LAN Port
CD-CP00-AU
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3