NEC Univerge SV8100 - Page 1142

Issue 1.0 UNIVERGE SV8100
2 - 1118 Transfer
20-13-32 Class of Service Options
(Supplementary Service) – Deny
Multiple Barge-Ins
In an extension Class of Service,
allow (1) or deny (0) the extension
ability to have multiple users Barge-
In to their conversation.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-14-11 Class of Service Options For
DISA/E&M – DISA/Tie Trunk
Barge-In
In an extension Class of Service,
enable (1) or disable (0) a DISA or
tie trunk user from using the Barge-
In feature.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-18-07 Service Tone Timers – Intrusion
Tone Repeat Time
After a user barges in, the system
repeats the Barge-In tone after this
interval. Normally, you should
disable this time by entering 0.
(This time also affects any other
call interruption features, such as
Voice Mail Conversation
Recording, Voice Over, etc.)
0~64800 (seconds)
(default = 0 seconds)
3
21-01-03 System Options for Outgoing
Calls – Trunk Interdigit Time
(External)
Program the time an extension
must wait before the Barge-In
feature can be used on a call (this
time expires before putting a call in
a talk state). This time also affects
Voice Over.
0~64800 (seconds)
(default = 5 seconds)
3
22-04-01 Incoming Extension Ring Group
Assignment
Assign extensions to ring groups. Maximum eight digits
Default:
Extensions 101~108
(first eight ports) ring for
incoming Ring Group 1
calls. No other
extensions ring for
incoming Ring Group 1
calls.
3
22-05-01 Incoming Trunk Ring Group
Assignment
Define a trunk ring group. When
transferring a DID or trunk call to
the trunk defined ring group, the
trunk then rings the defined
extensions for the ring group.
Incoming Group
Number for Day/Night
Mode (1~8):
0 (No Setting)
001~100
(Incoming Group)
102 (In-Skin/ External
Voice Mail or VM8000
InMail)
(default = 1)
3
22-08-01 DIL/IRG No Answer Destination Assign the DIL No Answer Ring
Group to which an unanswered call
should overflow.
0 (No Setting)
001~100
(Incoming Ring Group)
102 (In-Skin/
External Voice Mail
or VM8000 InMail)
(default = 1)
3
24-02-01 System Options for Transfer –
Busy Transfer
Disable (0) or enable (1) extensions
to transfer calls to busy extensions.
If disabled, calls transferred to busy
extensions recall immediately.
0 = Disable (No)
1 = Enable (Yes)
(default = 1)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3